P2000 G3 Logs

Running into trouble with your P2000 controllers.

Log a ticket with HP if you have support. If not, create a log and work through the log to see what the issue’s are

OPEN Windows Command Prompt

type: ftp <IP address of P2000>

then run Get logs <File name.zip>

Run the log and it will be saved in the location where your Command prompt opened.

I personally would browse to c:/Temp the FTP and run the logs.

 

Try and reseat the Controllers one by one. Remember it can take about 10 min to failover.

Hope this helps!

 

 

Comments

comments

Privacy Preference Center